Size Vida

Specs

  FIFTEEN
Площадь (m²) 15
Вес крыла (kg) 2.5
Количество основных рядов (A/B/C) 3
Воздухозаборники 59
Удлинение 6.9
Хорда (m) 1.9
Длина крыла 10
Wind range foil racing / twintip freestyle (knots) 12 - 22
Wind range foil freeride (knots) 7 - 15
Recommended line lengths - freeride (m) 17 - 18
Recommended line lengths - racing (m) 10 - 12

Info

The wind is an unpredictable traveller. It’s in constant evolution, in constant fluctuation, yet here we are, chasing its perfection. Training our acuity, refining our tools, in the hopes of understanding this transient energy on a deeper level.

The Vida is a product of patience and meticulous attention to detail, capable of redefining your connection to the elements and finding true pleasure.

A glide of meditation, a buttery soothing sensation of pushing the limits of speed. A moment that will stick with you. A moment for life.

– Dorian LeBihan

+ + + + +

Tech

Minimalistic bridle layout

A huge number of structural simulations were performed in order to minimise line consumption and reduce the number of attachment points. As a result, the kite has the simplest bridle line layout of any foil kite for it's class. So the lines do not tangle easily and you will be up and ready in seconds.

Morphing aerofoil

The shape of the kite's aerofoil is designed to change when it is powered or depowered. As a result, the power to depower ratio is exceptional. Powered up, a high-camber aerofoil provides all the lift you need; Depowered, the aerofoil turns into a low-lift, super stable reflex profile, so wyou can have absolute confidence when overpowered, even in the worst conditions.

Cord Cut Billow (CCB)

Технология Cord Cut Billow была разработана для улучшения трения формы, устойчивости крыла и общих характеристик наших кайтов. Два шва проходят по хорде на верхних панелях передней кромки, чтобы компенсировать раздувание панели, которое происходит при надувании крыла. По бокам надутой плоской панели, изгибающейся над профилем крыла, образуется до пяти сантиметров лишнего материала. Технология Cord Cut Billow поглощает материал с помощью 3D-кроя, что приводит к уменьшению волнистости и улучшенной форме профиля рёбер и устойчивости.

ALULA - программа для моделирования

Будущее дизайна кайтов во многом зависит от моделирования. Вместо того, чтобы проектировать и производить прототипы один за другим, теперь мы можем точно смоделировать сотни кайтов, используя нашу собственную уникальную программу структурного / аэродинамического моделирования. Фактически, теперь мы можем тестировать виртуальные прототипы с помощью этой программы, и на наших кайтах мы делаем более 200 виртуальных прототипов. Их анализ включает в себя более 500 тысяч итераций структурных / аэродинамических расчётов для каждой симуляции!

Трёхсоставные диагонали

KOALA имеет сложную внутреннюю структуру с использованием трёх диагональных полос. Это сделано для точной настройки распределения нагрузки для язычков крепления лески к поверхности кайта, чтобы максимизировать хордовую жёсткость для порывов ветра. Это также означает, что ткань не нагружается в перекосе, что увеличивает долговечность кайта.

Target

The VIDA is a high-performance kite for racing and airstyle. It has the agility and performance to satisfy the most demanding of riders and seasoned pros. Because of its stability and ease of use, it is also an accessible competition kite for riders just starting to get serious.

The VIDA is built for performance. It is a hybrid 3 / 2 liner with a high aspect ratio and thin lines. It has an incredible power range – the pull when it's fully powered up, compared to depowered, makes it very easy to use for its category. It means riders will feel in total control, and trust in the kite when out racing. You can put it where you want it, and the VIDA will stay on target in broad reach conditions.

Because it has no fibreglass rods, the VIDA is easy to relaunch and also easy to pack.

Foil-freestyle pro Maxime Desjardins loves the great pop and massive hangtime – this kite will make you fly!

Size 15 is available, size 10 will be released soon.

Not IKA registered


Designer Notes

At Airwave we design kites we want to ride. Tom designed the Vida for hydrofoil racing, as none of the existing options were exactly what he was looking for. Tom says:

When I started hydrofoil racing my dream was to push my own limits in the most difficult conditions, but none of the kites on the market quite did the job: the classic 3-liners were easy to handle with good power, but they lacked the depower to withstand strong gusts; the 2-liner kites had the depower, but, because of the fibreglass rods, they did not have enough power to water-start in light winds. They are hard to relaunch, and much harder to handle in general.

My super-computers started running at full capacity with one goal in mind – to get the best of worlds! The power and ease of use of 3-liner kites and the depower of 2-liner kites, without fibreglass rods. I also worked extensively with foil-freestyle professional Maxime Desjardins to test and validate its freestyle capabilities. Its longer lines and shorter brakes, with the great depower and performance really made it also amazing for airstyle!

Riding Level / Style

Material

Internal structure Porcher Skytex 40g/m² Hard
Top surface MJTex 32g/m²
Bottom surface MJTex 32g/m²
Pulleys Ronstan/Harken P18 pulleys
Top lines Edelrid Magix Pro 8001U
Middle lines Edelrid Magix Pro 8001U
Lower lines Edelrid Magix Pro 8001U

Download

Related Videos

AIRWAVE - Manifesto

11-02-2021

It’s been a long and exciting journey for Airwave. The company started out in a garage on the Isle of Wight in the ‘80s, designing hang gliders. Our path has taken many turns, always driven by our passion for flying. Now in the south of France,... Ещё